A new experimental simulation method for the development of non-renewable hydrogen energy—Oil and gas resources

At present, the proportion of tight oil in non-renewable hydrogen energy is increasing. According to an initial exploration and attemptable practice on the exploration of tight oil, it is found that the cost can be controlled effectively and positive effects are achieved. But this technique cannot make sure the proppants filled uniformly in the long fracture. Several researches on the proppants migration experiment devices and factors influencing on proppant setting are reviewed and a new set of experimental device to simulate the laws of proppants setting in long fracture is developed. This device can simulate the main factors influencing proppants setting performance. It analyzes several factors such as wall filtration, construction displacement, sand concentration, proppant size and density, viscosity of fracturing fluid is used to rank the influencing degree of every factor. Considering the effects of mutual interference between proppants, width of fracture, rough fracture surface and fracture surface filtration during the proppants setting progress, the mathematical model of proppant setting is modified by adding sand concentration correction factor, wall effect correction factor and filtration correction factor. The experimental data verify the accuracy of the settlement model is established using the data getting from experiment.     

Nitrogen dry deposition to Lake Superior and Lake Michigan

Nitrate (NO₃^?) levels in Lake Superior have increased from historic levels of about 5?μM to its current concentration of about 25?μM. The atmosphere makes a substantial contribution to the nitrogen budgets for Lake Superior and Lake Michigan. This study provides a more well-defined estimate of nitrogen dry deposition rates derived from the measurement of over-water concentrations, and in situ meteorological measurements, which were input into the Resistance Model. We obtained a nitrogen dry deposition rate of [(3.41?±?2.26)?×?10⁷?kg?N/yr; (5.90?±?3.91)?kg?N/ha/yr] over Lake Michigan, and [(1.54?±?1.06)?×?10⁷?kg?N/yr; (1.87?±?1.27)?kg?N/ha/yr] over Lake Superior. Nitric acid (HNO₃), which originates from the combustion of fossil fuels, contributes 84% of the total nitrogen dry deposition to Lake Michigan; and 66% to Lake Superior. Ammonia (NH₃), which originates from agricultural activities and gasoline combustion, is the second highest contributor of nitrogen dry deposition to both lakes: contributing 13% to Lake Michigan and 32% to Lake Superior. The nitrogen dry deposition is approximately 68% of the nitrogen wet deposition over Lake Superior, and approximately 80% of wet deposition over Lake Michigan. The over-water dry deposition velocity of HNO₃ and NH₃ were also evaluated. We obtained morning deposition velocities of 0.099?cm/s for NH₃ and 0.095?cm/s for HNO₃; and afternoon values of 0.137?cm/s for NH₃ and 0.132?cm/s for HNO₃. Another key finding is that the atmospheric concentrations of nitrogen compounds near Lake Michigan and Lake Superior have decreased since 2003.     

Hydrogen production by oxidative steam reforming of methanol over anodic aluminum oxide-supported Cu-Zn catalyst

Oxidative steam reforming of methanol (OSRM), which is a convenient reaction for producing hydrogen, suffers from the hot spot formation problem when conventional particle catalysts are used. Recently, an anodic aluminum oxide (AAO)-supported Cu-Zn catalyst was proposed as an OSRM catalyst for its high thermal conductivity through the aluminum metal body. In this study, OSRM was conducted in a prototype reactor packed with the AAO plate catalyst strips. It was verified that the high thermal conductivity of the catalyst effectively suppresses the hot spot formation and makes the temperature profile smooth along the reactor. The start-up time of the reactor depended on the preheating temperature and was very short (less than 2 min) for preheating over 503 K. The methanol conversion and reactor temperature increased with increasing O₂/CH₃OH mole ratio, indicating that the mole ratio can be used as a control variable to operate the reactor at desired conditions. Further, a reactor model was developed and verified, and the simulation showed that for a given total reactor volume, an optimal reactor configuration could be achieved by shortening the reactor length while widening the cross-sectional area.     

Study on internal stress damage detection in long-distance oil and gas pipelines via weak magnetic method

Weak magnetic stress detection is an important issue in oil–gas pipeline internal detection area. In order to verify the characteristics of weak magnetic stress internal detection signals, we built herein a magneto-mechanics equivalent model having a balanced magnetic field. First, we calculated the relationship between the stress and the weak magnetic signals; consequently, the analysis propagation laws of the weak magnetic signals with non-magnetic saturation were pointed out. Finally, the theoretical model was validated by a systematic experimental research. The analytical results show that a one-to-one linear link between the weak magnetic signals and the stress concentration is clear. Instead, the change of the weak magnetic signals with the liftoff is nonlinear, therefore we are proposing the Boltzmann liftoff correction factor whose degree of adaptability of the equivalent model can reach the value of 94%. It is possible to note that when the liftoff is in the approximate linear stage, the relevance ratio and the recognition rate of the magneto-mechanics curve show a high-quality. This conclusion is important in the engineering field for the set of the liftoff.     

Attitudinal choice models with applications in human decision making

A new family of attitudinal discrete choice models is proposed by considering the attitudinal character and the weight vector, both of which are specific to a decision maker (DM). Given the attribute values of different alternatives, the proposed models give varying choice probabilities, as per the DM's-specific attitudinal character and the weight vector. It is also shown that the conventional discrete choice models are the special cases of the proposed attitudinal models. The proposed choice models are also generalized through an additional parameter to add to their capabilities. An application on real data is included to demonstrate their usefulness in the real world.     

Evaluation of dynamic modulus measurement for C/C-SiC composites at different temperatures

The determination of elastic properties at application temperature is fundamental for the design of fibre reinforced ceramic composite components. An attractive method to characterize the flexural modulus at room and high temperature under specific atmosphere is the nondestructive Resonant Frequency Damping Analysis (RFDA). The objective of this paper was to evaluate and validate the modulus measurement via RFDA for orthotropic C/C-SiC composites at the application temperature. At room temperature flexural moduli of C/C-SiC with 0/90° reinforcement were measured under quasi-static 4-point bending loads and compared with dynamic moduli measured via RFDA longitudinally to fibre direction. The dynamic modulus of C/C-SiC was then measured via RFDA up to 1250°C under flowing inert gas and showed an increase with temperature which fitted with literature values. The measured fundamental frequencies were finally compared to those resulting from numerical modal analyses. Dynamic and quasi-static flexural moduli are comparable and the numerical analyses proved that bending modes are correctly modeled by means of dynamic modulus measured via RFDA. The nondestructive RFDA as well as the numerical modeling approach are suitable for evaluation of C/C-SiC and may be transferred to other fibre reinforced ceramic composite materials.     

APP软件性能效率研究

性能效率是APP软件的重要质量属性，但目前缺乏APP软件性能效率的通用模型。分析了APP软件的性能特征，基于ISO/IEC 25010标准提出了APP软件的性能效率模型，定义了APP软件性能效率的子特性和度量指标。基于提出的APP软件性能效率模型，通过实验对APP软件的性能效率进行了度量及相关分析。     

甲苯+乙醇+1-癸基-3-甲基咪唑醋酸盐物系等压气液相平衡数据的测定及关联

在常压下测定了甲苯+乙醇+1-癸基-3-甲基咪唑醋酸盐([C_(10)MIM][OAc])三元物系的等压气液相平衡数据,使用Aspen软件中NRTL模型对三元气液相平衡数据进行关联,通过计算得到方程参数。实验结果表明,[C_(10)MIM][OAc]的加入对甲苯有显著的盐析效应,[C_(10)MIM][OAc]摩尔分数越大效果越明显,当[C_(10)MIM][OAc]摩尔分数达到0.15时甲苯-乙醇的共沸现象完全消失。由NRTL模型计算出[C_(10)MIM][OAc]打破甲苯-乙醇体系共沸的最小摩尔分数为0.139 7。[C_(10)MIM][OAc]可以用作分离甲苯-乙醇共沸体系的萃取剂。     

The location and sizing of urban freight loading/unloading lay-by areas

The volume of freight vehicles operating within city boundaries is steadily increasing, which contributes to road congestion, especially in urban areas with a parking deficit. The proper identification of the location and size of commercial parking lay-by areas, where delivery vehicles can park for a limited time to perform loading/unloading operations, can relieve road congestion. Compared to the existing literature, this paper presents an improved two-stage approach, which includes a mathematical programme and a simulation model for determining the location and sizing of lay-by areas. The robustness and soundness of the results from a methodological and practical point of view are discussed using an example application.